Main uses and characteristics of vehiclesThe car uses a unique patented technology, which can not only deal with micron and submicron dust particles (can eliminate fine dust particles less than 1um), but also deal with some high temperature, high humidity, toxic and harmful dust particles and gases, with a dust removal efficiency of up to 99%. Based on the principle of negative pressure collection and positive pressure discharge, the materials are discharged into the recovery bin or designated place to complete the cleaning, collection and transportation of various bulk materials in a closed way, which has many advantages such as saving resources, protecting the environment and reducing labor intensity.
The vehicle can not only pump solid materials and dust, but also wet liquid materials. It can also be used to dredge and clean various sewer pipes. In addition, it can be used to reduce dust in local space. Widely used in steel, coking, power generation, cement, petrochemical and other industries dust, ash powder, cement, lime powder, iron powder, solid waste liquid and other materials collection, shipping. It can also be used for emergency treatment of sudden environmental pollution accidents, such as the collection of toxic and harmful materials caused by traffic accidents.
Product TechnologyParameter Table| Serial number | entry name | Detailed description |
| 1 | Whole Vehicle | Vehicle name | Powder material suction and discharge truck |
| Chassis | DFH1310A（Dongfeng Tianlong） |
| Engine | Di75E350-60（Cummins, G6） |
| Transmission case | 9JS150T-B（fast 9） |
| Configure | 11.00R20tire, ABS, air conditioner |
| wheelbase | 1995+4600+1350 |
| Total mass kg | 31000 |
| Overall dimension mm | 11700×2520×3880 |
| 2 | Engine | Emission standard | Sixth grade |
| Power kw | 257 |
| Fuel type | diesel oil |
| 3 | Material tank | Tank volume m3 | 23 |
| Tank material | Q345B |
| Tank wall thickness mm | 6 |
| Design pressure bar | -0.9/3 |
| Feed valve | 6英寸 |
| Maximum lifting angle of tank（º） | ≥45 |
| Hydraulic jacking pump | Front single top, double acting cylinder |
| Rapping system | Imported vibration system to prevent hardening of materials |
| Back cover opening mode | hydraulic pressure |
| 4 | Suction system | Vacuum degree bar | -0.7 |
| Maximum air flow m3/h | 5500（US imported R00TS 624J） |
| Suction Distance m | ≥20 |
| Suction port configuration | DN150 disc valve (DN 150 quick connection) |
| Loading speed | 30-60 m3/h |
| 5 | Discharge system | Discharge mode | 1. Pressure discharge, 2. Open the back cover to lift and dump, 3. Add external air source interface (DN65) |
| Air compressor | Wuhu Fuda oil free swing air compressor |
| DBW-10-2 |
| Working pressure bar | 2 |
| Maximum displacement m3/h | 600 |
| Discharge valve | 4inches |
| Surplus rate ‰ | ≤2 |
| Discharge speed | 30-60m3/h |
| 6 | Dust removal system | Inertia dust collector | Dust removal accuracy＞50μm |
| The dust removal efficiency is 96%, |
| Cyclone system | Dust removal accuracy＞5μm |
| The dust removal efficiency is94%， |
| The maximum treatment temperature is 200℃ |
| Bag filter | Bag filter (dust removal accuracy: 1μm,） |
| Dust removal efficiency≥99% |
| The maximum treatment temperature is 200℃ |
| Automatic cleaning: compressed air back blowing |
| 7 | Brace | Hydraulic support | Hydraulic support
|
